Full Factory Tour
Sanli Factory Overview
Real footage from Sanli's Jieyang manufacturing base, showing key flatware production stages, packaging, warehousing and the sample room.
See How Sanli Stainless Steel Flatware Is Made
Guangdong Jieyang Sanli Metal Products Co., Ltd.
广东省揭阳市叁利金属制品有限公司
No. 78, National Highway, Jiedong District, Jieyang, Guangdong
This page presents real footage from Sanli's manufacturing base, including material preparation, forming, edge processing, surface finishing, packaging, warehousing and the sample room. It is designed to help importers, wholesalers, hospitality suppliers and private-label buyers understand our production environment before starting a project.
Real Production AreasWorkshop, tooling, packaging and warehouse footage
Process-Level EvidenceNine recorded flatware production stages
B2B Project SupportOEM/ODM, packaging and sourcing discussions
Factory Overview
A complete video tour of Sanli's Jieyang manufacturing base, covering key production processes, packaging areas, warehousing and the sample room.
Flatware Production Process
The videos below follow the production sequence recorded by Sanli. Exact operations can vary by utensil type, handle design, finish and project requirements.
Material Cutting +
Step 01
Material Cutting
Stainless steel material is cut into production blanks for subsequent shaping operations.
Horizontal Thinning +
Step 02
Horizontal Thinning
The blank passes through horizontal thinning equipment to prepare the required profile for later forming.
Edge Trimming +
Step 03
Edge Trimming
Excess material is trimmed to refine the outline before further handle and edge processing.
Handle Embossing +
Step 04
Handle Embossing
A press forms the decorative handle pattern used for the selected flatware design.
Edge Grinding +
Step 05
Edge Grinding
Edges are ground to refine the profile and prepare the piece for additional finishing.
Edge Finishing +
Step 06
Edge Finishing
Further edge treatment smooths and finishes the perimeter before later process stages.
First Surface Treatment Stage +
Step 07
First Surface Treatment Stage
An initial surface treatment prepares the flatware for subsequent forming and polishing operations.
Press Forming +
Step 08
Press Forming
Press equipment shapes the piece according to the utensil form and selected product design.
Mirror Polishing +
Step 09
Mirror Polishing
Polishing develops the reflective mirror surface shown on applicable stainless steel flatware models.
Process note: The sequence shown documents real activities at the Sanli manufacturing base. Not every flatware model uses exactly the same tooling, handle treatment, surface process or packaging method. Buyers can confirm the applicable process when requesting a model-specific quotation.
Packaging, Warehousing & Sample Support
Supporting areas help organize semi-finished pieces, packing operations, finished goods and buyer-facing sample review.
Semi-Finished Goods Warehouse +
Process Storage
Semi-Finished Goods Warehouse
Semi-finished pieces are organized between production stages before further processing or packing.
Packaging Workshop +
Packaging
Packaging Workshop
Flatware sets move through packing operations according to the selected set configuration and packaging program.
Finished Goods Warehouse +
Finished Goods
Finished Goods Warehouse
Packed products are stored in the finished goods area before shipment arrangements are completed.
Sample Room +
Buyer Review
Sample Room
The sample room displays representative flatware sets and packaging formats for product and sourcing discussions.
Factory & Production FAQ
Is this footage from Sanli's own manufacturing base?
Yes. The videos on this page were recorded at Sanli's stainless steel flatware manufacturing base in Jieyang, Guangdong, China.
Does every flatware model use all nine recorded production steps?
No. The applicable tooling, forming, edge treatment, surface finishing and packing process depends on the utensil type, handle design, finish and order requirements.
Can buyers request OEM logos, finishes and packaging?
Yes. Sanli supports project-based OEM/ODM discussions covering suitable existing molds, logos, finishes, set combinations, color boxes, gift boxes, barcode labels and export packing.
How can a buyer request samples or a quotation?
Send the model number, quantity, finish, packaging requirements and destination market through the contact page. Sanli will review the project details and respond with the applicable sourcing information.
Discuss Your Flatware Sourcing Project
Share the product model, order quantity, finish, packaging requirements and destination market for a model-specific B2B quotation.
Review OEM/ODM Services Request a B2B Quote